1 de abril de 2016 - AMA #65

Traducido por Blaya y Lizarman

18 comentarios

Jan

Why yes, I do still have the SCSI card in question :D

Have a question for the cast? Send them here!

OmegaWolf • 01/04/2016

One question, what is it even used for?

Jan • 01/04/2016

It was used to connect a scanner to the PC. Otherwise, I'd have to use the dreadfully slow parallel port.

Lord_Chaos • 01/04/2016

I still have one. Don't use it anymore.

Bruce B. • 01/04/2016

Which was great, till you upgraded to the next version of Windows and couldn't get new drivers for the scanner... Been there many times - throw it on the Junk Pile and get a new one. Same for printers and other peripherals...

Pylot • 01/04/2016

This was (and still is) my desk. I have an ISA SCSI sitting around somewhere.

Vanbael • 01/04/2016

Wolf just needs a Commodore 64 and his collection is complete!

LionkingCMSL • 01/04/2016

I can beat Wolf on this one; as I have a fully working KayPro 4 and a AT&T 6300plus.

Anyone remember the KayPro's CP/M operating system and the 6300's 236 processor?

Heck, I even have a Atari 400 with the Basic cartridge and tape drive.

Fred Brown • 02/04/2016

Heck yeah, without a dusty C64 or decrepit Apple IIe Wolf's geek cred is in question.

Got a C64 (still works) and a disk drive (dead), and to complete the set, one of the first VIC-20s made. Whoo-hoo, there's geekness, like, dripping off my tail. :- )

Bruce B. • 06/04/2016

@Fred Brown, @LionkingCMSL Et. Al: You're going to make me haul in my pile of TI-99/4A stuff and fire it up, aren't you? Peripheral Expansion Box and P-Code card and the whole shebang.

I used the "TI 99/4A Impact Printer" for many years after for 1-up tractor mailing labels. (Shh!! It's really an Epson MX-80 with both Parallel and Serial, don't tell anyone.)

And the Fully Loaded PC-XT only needed a new MFM hard drive when I put it up on blocks...

EccentricOrbit • 06/04/2016

I happen to have three "electronics junk bins" - most of the stuff is actual (useable) bare components, but some of it is stuff I've just taken apart to see how it works.

Ekuah • 10/04/2016

I think I can beat that in obsolescence. I have an old PC1715W somewhere in my junkpile. For those of you who have no clue what that is: https://en.wikipedia.org/wiki/PC_1715

Dyfed • 11/04/2016

Piffle 16bit ISA SCSI, if it was an 8 Bit one....

Dyfed • 11/04/2016

Before I forget the computer that I still use every so often is a PDP-8e.... :P 8K core memory...

Sander Fox • 10/06/2016

That's not junk. That's treasures:3

Silverwolf • 06/06/2018

Ye gads, I remember when SCSI was still faster than ATA. The problem was SCSI was more expensive, and if you had more than one in the chain, you needed to have a terminator at the other end. Most of the time internal drives handled it with a jumper setting and external drives handled it with a switch, but if you didn't have those, you had to go out and buy a terminator block.

Still when I got a G4 dual processor (again, fastest AT THE TIME) I got it with a SCSI drive.

Legacy technology comes in handy especially when you still have old media kicking around.

junk collector • 23/07/2019

The ISA SCSI photo is absent.

tracer • 04/01/2020

No photo, 404.

Fletcher_Crane • 27/07/2020

Don't know how it stacks up to everybody else, but I've still got my dad's RadioShack TRS(Trash)-80.

Los comentarios están cerrados.